Survival Unlimited.com
  
1-800-455-2201,  (225) 647-2171,  Division of Picou Builders Supply
Net Hours: Mon-Fri 10:00 am - 5:00 pm Central Time  Contact & Address

OUTBACK POWER PRODUCTS
Inverters • DC Load Panels • AC Load Panels
DC Breakers • AC Breakers • AC/DC Power Systems

FX Inverter

VFX Inverter

Outback Sine Wave Inverters
Battery Systems w/Generator Backup
There is no access to the inside by insects or moisture (FX Model), cast aluminium case helps keeps this unit cool. *Stackable (Grid Tie System will be available soon)
2800 Watt, 12 Volt  (VFX Interior Only) $1833.00
2000 Watt, 24 Volt  (FX Exterior or Interior) (More Info) (Manuel) $1379.00
3500 Watt, 24 Volt  (VFX Interior Only) (More Info) $1750.00
2500 Watt, 48 Volt  (FX Exterior or Interior) $1725.00
3600 Watt, 48 Volt  (VFX Interior Only) $1833.00

All Inverter Specifications

Model #  

Easily upgraded when new software, or when circuit boards come out in future and owner can easily install on the job. Extra boards can be purchased as backup in case of failure. Very remote customers like this emergency feature.

Mfg Web Site www.outbackpower.com

DC Connector Cover - Black Aluminum Plate over Connections
$55.99 #FX-DCC


DC Adapter - Use to hide wire between inverter and PSDC
$38.79 #FX-DCA

AC Wiring Extension - Use to hide wire between inverter & PSAC
$29.99 #FX-ACA
Complete Kit Containing all parts above
$110.99 #FXA

 

MX60 Charge Controller


OutBack MX60 MPPT Charge Controller
Input up to 72 Volts Nominal (3ea-24v Panels) Output: 12v, 24v, 36v, 48v, 54v, 60v
This is the best charge controller on the market. Rightfully so.
$483.00 #MX60

Remote Battery Temperature Sensor, 25'
To accurately charge many battery types, a sensor is required. During winter conditions more power is required to charge properly.
$25.00 #RTS25



This unit allows you to use much smaller wire from your PV array to your charge controller. Wire cost savings alone will pay for this unit. In addition, the efficiency of this unit outperforms all other chg. controllers. Includes one Voltage controlled output which can operate a relay. Has 4 lines on the LCD Display. It now comes with data logging. It will display a wide variety of usefull information. You can also buy and connect the "Mate" up to monitor and change setting remotely. You can also monitor you system via the internet when you have the "Mate & "Hub". In the near future this unit will also be able to handle small wind turbines. All software is upgradeable. See all of the great features on the installation manuel. Indoor use only. Also see Secifications.

 


Remotely control and monitor up to 10 Outback Products with "Hub". See individually what all of your PV arrays are producing from this unit. See if you are producing more than you are using. Adjust settings, etc. Specifications     Manuel
$244.26

Typical Hub-10 Install

Typical Hub-4 Install


OutBack Hub-4, and Hub-10 System Communitcation Manager
Use with Mate to expand controll of up to 10 Outback products
  $169.00 #HUB4


$310.50 #HUB10

    Manuel

Typical Wall Mounting

 

 

 

 


OutBack PV Combiner Box   (Solar Panel Combiner)
$110.00    #PSPV

Circuit Breakers for PSPV: 6 amp, 9 amp, 10 amp, 30 amp
$ 10.00 /ea    #OBPV--

 
Size  

PSSB PV Combiner Box for Sunny Boy Inverter
$198.00    #PSSB


PSSB Mounting Plate
$81.50    #PSSB-MP

Segmenting Circuit Breaker
$87.50   #OBSB

PSSB Fuse, 600 Volt - 6 Amp, 15 Amp
$14.95    #OBF6, OBF15

Size