|
PRI-OCIDE
- Diesel & Kerosene Fuel Microbicide
 PRI-OCIDE
kills
bugs in fuel…fast! Add PRI-OCIDE to your diesel fuel
to instantly kill any bacteria, algae, or fungi that has grown in
the fuel, and to prevent any further growth. Unlike traditional
microbicides that only kill growth on a one-time basis, PRI-OCIDE
keeps working in your fuel to safeguard it from further unwanted
growth.
PRI-OCIDE
is a synergistic combination of two microbiocides designed to provide
a broad spectrum of microbicidal activity, especially where the
control of such growth has historically been difficult.
Why Do I Need A Microbicide? –
It is very common for small amounts of water to accumulate in diesel
fuel. This occurs through a natural process of condensation, and
in some cases, through leaks in tank seals. Once present in your
fuel, the water acts as a breeding ground for microorganisms, such
as bacteria, algae, and fungi. These organisms feed off the hydrocarbons
in your fuel, creating a waste product which is corrosive and harmful.
These microorganisms also create a layer of emulsified oil, which
further increases the microorganism growth, thereby increasing the
rate at which your diesel fuel degrades.
Two Phase Effectiveness –
PRI-OCIDE contains two active ingredients that work together
synergistically to kill growth in both the water and emulsified
oil phases. PRI-OCIDE penetrates the emulsified oil phase,
killing growth therein, and quickly disperses into the water phase,
where the bulk of mircoorganisms grow. As PRI-OCIDE kills
these microorganisms, the emulsified oil separates and this valuable
fuel is returned to a usable form. The creation of sludge is halted,
and tank corrosion is inhibited.
|
Gallons
Treated
|
Initial
Treatment
|
Maintenance
Treatment
|
|
30
|
1
oz.
|
½
oz.
|
|
90
|
3
oz.
|
1
½ oz.
|
|
180
|
6
oz.
|
3
oz.
|
|
480
|
16
oz.
|
8
oz.
|
|
3,800
|
1
gallon
|
½
gallon
|
Economical
To Use –
Best yet, PRI-OCIDE is extremely economical to use. On
first application to the fuel, PRI-OCIDE is dosed at its
"Initial Treatment" ratio. Thereafter, this already
economical dose rate is cut in half, and PRI-OCIDE is used
at its "Maintenance Treatment" ratio.
Effective
In All Distillates – EPA registered,
PRI-OCIDE is effective in all diesel fuels, MDOs, MGOs, and
home heating oils. PRI-OCIDE can also be safely combined
with PRI-D, so that you can protect your diesel fuel while
at the same time, enhance the fuel’s performance. Use PRI-OCIDE
in each fill up to keep your fuel free from contamination and
thereby safeguard your valuable engine.
|
